بنر درباره ما
بنر درباره ما

EPOXY FLOOR COATING Epofloor G

Description :

This is a two component amine cured solvent free epoxy coating. It is a self-smoothing, easy to apply product, leaving a seamless surface. It has excellent chemical, abrasion and impact resistance. It can be applied in two coats or on approved primers depending on the conditions of the concrete substrate.

Usage :

  • The temperature of the substrate should be minimum 10°C and at least 3°C above the dew point of the air, measured in the vicinity of the substrate. Good ventilation is usually required in confined are
  • levels of mechanical and chemical exposure. It is recommended for warehouses, garages, dairies and factories

Features and benefits :

  • solvent free
  • self-smoothing
  • easy to apply
  • It has excellent chemical, abrasion and impact resistance

How to use :

The product can be applied by:
Brush:        Use a stiff nylon brush.
Roller:        Recommended.
To avoid air bubbles, it is very important to pierce the coating with a spiked roller when desired film thickness is achieved.
The temperature of the substrate should be minimum 10°C and at least 3°C above the dew point of the air, measured in the vicinity of the substrate. Good ventilation is usually required in confined areas to ensure proper drying. The moisture content in the substrate should not exceed 4% (by weight). The coating should not be exposed to oil, chemicals or mechanical stress until fully cured.